Assembling 1st and 2nd gear locking collar/synchronizing hub
WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Install locking pieces - arrows A - into mounted synchronizing hub - 1 -.
- Install locking collar - 2 - onto synchronizing hub so that the wide splines of locking collar and synchronizing hub - arrow B - coincide.
- Install circlip for 1st and 2nd gear synchronizing hub.
- Install 2nd speed selector gear with needle bearing and synchro-rings.
- Install circlip for tapered roller bearing inner race onto hollow shaft.