Determining thickness of circlip
WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of VOLKSWAGEN UNITED STATES, INC.
- Determine thickest circlip that will just fit and install it.
NOTE:
- The circlips for the synchronizing hubs and individual gear wheels should also be determined as shown for the double tapered roller bearing.
The following circlips are available:
| Circlip thickness (mm) |
| 2.00 |
2.06 |
2.12 |
| 2.03 |
2.09 |
2.15 |