Determining thickness of shim "S4"

WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Formula: "S₄ " = "S_total " - "S₃ "

Example:
	Total shim thickness "S_total " for "S₃ " plus "S₄ "	1.59 mm
-	Thickness of shim "S₃ "	0.70 mm
=	Thickness of shim "S₄ "	0.89 mm

Determine shim(s) according to table.

Shims available for "S₄ "

Shim thickness (mm) * See note
0.33	0.73	1.13
0.37	0.77	1.17
0.41	0.81	1.21
0.45	0.85	1.25
0.49	0.89	1.29
0.53	0.93	1.33
0.57	0.91	1.37
0.61	1.01	1.41
0.65	1.05	1.45
0.69	1.09	1.49

*The exact shim thickness required can be obtained by using the shim tolerance variations. Install two shims if necessary.