Pulling tapered roller bearing outer race out of transmission housing
WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Removing differential → Differential, removing and installing .
- Install thrust piece 2050 with large diameter pointing toward outer race.
- Install threaded spindle and thrust pad of assembly tool 3253 with thrust plate VW 401 onto transmission housing.
The outer race will be pulled out of transmission housing when nut is tightened.