Pulling tapered roller bearing outer race out of bearing housing

WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Pulling Tapered Roller Bearing Outer Race Out Of Bearing Housing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

A - Counter-support, e.g. Kukko 22/2

B - Internal puller 56 to 70 mm, e.g. Kukko 21/8