Pressing tapered roller bearing outer race into bearing housing

WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Pressing In Tapered Roller Bearing Outer Race For Pinion Shaft With Shim Into Bearing Housing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Support bearing housing with press support-RI wheel brgs. 3144 directly below bearing mounting.

Press in outer race until limit stop.