Pressing off thrust washer for reverse selector gear
WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pressing Off Thrust Washer For Reverse Selector Gear
Courtesy of VOLKSWAGEN UNITED STATES, INC.
A - Splitter 22 to 115 mm, e.g. Kukko 17/2
NOTE:
Install splitter - A
- below thrust washer, and not below circlip.