Checking axial play of 1st speed selector gear
WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Press 1st speed selector gear - 2 - in direction of - arrow A - as far as stop.
- Measure distance between 1st speed selector gear - 2 - and synchro-ring - 3 - using a feeler gauge - 1 -.
Example: 2.55 mm
- Press 1st speed selector gear - 2 - in direction of 2nd speed selector gear - 4 -.
- Measure distance again between 1st speed selector gear - 2 - and synchro-ring - 3 - using a feeler gauge - 1 -.
Example: 2.15 mm
- The difference between two measured values must be between 0.20to 0.50mm.