Pressing off inner race of small taper roller bearing together with 1st sliding gear

WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Pressing Off Inner Race Of Small Taper Roller Bearing Together With Selector Gear Of 1st Gear

Courtesy of VOLKSWAGEN UNITED STATES, INC.

NOTE: Do not press off together with synchro-hub for 1st and 2nd gear and 2nd gear sliding wheel.