LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (1.8L - Turbo Engine Mechanical, Engine Code(S): AMB) >> 13 - Engine - Crankshaft, Cylinder Block >> Sealing flanges and flywheel/drive plate, removing and installing >> Crankshaft oil seal - pulley end, replacing >> Tightening torque

Tightening torque

WARNING: This page is about a different car, the 2006 Audi A4, 2005 Audi A4, 2004 Audi A4, and 2003 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Component Nm
Toothed belt sprocket to crankshaft 90 + 90 ° * See note

*Replace bolt

* 90 ° is a quarter turn

scientia non olet · About LEMON Manuals