Determining thickness of shim "S3"
WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- If dial gauge reading is in red scale, subtract dimension "e".
- If dial gauge reading is in black scale, add dimension "e".
- The deviation "r", which is related to the master gauge "Ro" is measured for the final drive sets supplied as replacement parts and marked on the outer circumference of the ring gear.
| Formula: |
| "S3" |
= |
"S3*" + "r" + "e" |
| ("e" in black scale) |
| "S3" |
= |
"S3*" + "r" - "e" |
| ("e" in red scale) |
| Example: |
|
| |
Inserted shim "S3*" |
0.60 mm |
| + |
Deviation "r" |
0.38 mm |
| - |
Determined value "e" (red scale) |
0.26 mm |
| = |
Thickness of shim "S3" |
0.72 mm |
- Determine shim(s) as accurately as possible from table. Part numbers