Installing clutch slave cylinder

WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Clutch Slave Cylinder, Bracket And Hose/Line Assembly

GW00005263

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fasten bracket for hose line assembly -3- onto slave cylinder -4- and bolt together slave cylinder to transmission.
Insert the clutch slave cylinder into the mounting hole of the transmission housing, keep it in line with the direction of operation of the push rod.

NOTE:

There is a danger that the push rod will be guided past the clutch release lever if the clutch slave cylinder -4- is inserted off-line.
Press in the clutch slave cylinder far enough so that the securing bolt can be fitted easily.
Replace securing bolt - 2-.