LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (3.0L - Cylinder Head, VALVETRAIN - Engine Code(S): CCBA (Cabriolet)) >> 15 Cylinder Head, VALVETRAIN >> Removal And Installation >> Left Cylinder Head Cover >> Removing

Left Cylinder Head Cover: Removing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Ignition Coil Puller T40039 Removing Ignition Coils
GWWA28-0074Courtesy of AUDI OF AMERICA, LLC

-- Remove ignition coils. Refer to Removal and Installation .

Fig 2: Identifying Left Cylinder Head Cover Bolt, Tightening Sequence
GWWA15-10390Courtesy of AUDI OF AMERICA, LLC
CAUTION:

Risk of violating emissions legislation.

  • Do not open the hose connection -arrow-.

-- Remove the bolts in the following sequence -12 to 1- and lay the left cylinder head aside with the crankcase ventilation hose -arrow- connected.