Removing The Large Ball Bearing -B- From The Center Differential

WARNING: This page is about a different car, the 2010 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing the Large Ball Bearing -B- from the Center Differential

Courtesy of AUDI OF AMERICA, LLC

-- Install the VW 447 H with the small diameter in the center differential.

-- Place the 40 - 105 on it.

A - Three arm puller, for example Kukko 45-2

Fig 2: Installing the Large Ball Bearing -A- on the Center Differential

Courtesy of AUDI OF AMERICA, LLC