LEMON Manuals
: Even more car manuals for everyone
Home
>>
Audi
>>
2016
>>
S4 Premium Plus, Standard Trans
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 166 (Gears, Shafts - Manual Transmission Internal Components 0B2 AWD (Cabriolet))
>>
35 Gears, Shafts
>>
Description And Operation
>>
Output Shaft Assembly Overview
>>
Installed Position: Locking Collar -2- And Reverse Gear Wheel -1-
Installed Position: Locking Collar -2- And Reverse Gear Wheel -1-
WARNING:
This page is about a different car, the 2010 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Installed Position: Locking Collar -2- And Reverse Gear Wheel
Courtesy of AUDI OF AMERICA, LLC
The pointed teeth -arrow A- in the locking collar -2- face opposite the reverse gear selector gear drive splines -arrow B- -1-.