LEMON Manuals
: Even more car manuals for everyone
Home
>>
Audi
>>
2016
>>
S4 Premium Plus, Standard Trans
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 165 (Controls, Housing - Manual Transmission Internal Components 0B2 AWD (Cabriolet))
>>
34 Controls, Housing
>>
Disassembly And Assembly
>>
Transmission Housing
>>
Removing The Output Shaft Ball Bearing From The Transmission Housing
Removing The Output Shaft Ball Bearing From The Transmission Housing
WARNING:
This page is about a different car, the 2010 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Output Shaft Ball Bearing From Transmission Housing
Courtesy of AUDI OF AMERICA, LLC
Remove the ball bearing locking ring before hand.