Clutch Pedal: Removing

WARNING: This page is about a different car, the 2010 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bracket. Refer to MECHANICAL COMPONENTS - BRAKE SYSTEM (CABRIOLET) .

-- Remove the over-center spring -2-. Refer to OVER-CENTER SPRING .

Fig 1: Actuating Clutch Pedal

Courtesy of AUDI OF AMERICA, LLC

-- Remove the mounting pins -1-.

Fig 2: Identifying Mounting Pins, Removal/Installation

Courtesy of AUDI OF AMERICA, LLC

-- Lift the securing tab -arrow A-, turn the axle in direction of -arrow B- and remove the axle -2-.

-- Remove the bearing axle -2- and the clutch pedal -3-.