Ribbed Belt TENSIONING Damper, Vehicles With Hydraulic Power Steering: Removing

Fig 1: Identifying Engine Cover -1- And -2-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front engine cover -1- upward.

-- Remove the bolt -2- on the left front coolant pipe.

Fig 2: Identifying Coolant Pipes

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front noise insulation -1-. Refer to NOISE INSULATION .

Fig 3: Identifying Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

Vehicles with Left Front Coolant Pipes, Version 1 

Fig 4: Identifying Hose Clamps -1 And 3- & Left Front Coolant Hose

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2- on the left front coolant pipes.

Vehicles with Left Front Coolant Pipes, Version 2 

Fig 5: Locating Lower Coolant Pipe Bolt

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- on the left front coolant pipes.

All Vehicles 

Fig 6: Releasing Belt Tension

Courtesy of AUDI OF AMERICA, LLC

-- Pivot the tensioner clockwise -arrow- to release the tension on the ribbed belt.

-- Remove the ribbed belt from the tensioning element and release the tension on the tensioning element.

-- Remove the cover -1- and the bolt below it.

Fig 7: Identifying Cover -1- And Ribbed Belt Tensioner -2-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the ribbed belt tensioner -2- from the cylinder block.