Headrest guides, removing and installing

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Fig 1: Headrest Guides, Removing And Installing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

For clarity, headrest guide - 1 - is shown removed.

Insert an upholstery needle or screwdriver - 3 - (max. width 2 mm) into hole - 4 - (hole - 4 - is located across from retaining clip for headrest guide).
Pry screwdriver - 3 - in direction of arrow - A - and press catch - 2 - in direction of arrow - B -, pull out headrest guide - 1 - while doing so.

Installing

Installation is reverse of removal.