LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1576 (Body Interior - Except Cabriolet (72-Seat-Frames & 74-Seats-Upholstery, Covers)) >> 72 - Seat - Frames >> Front seats (standard seat) - vehicles up to 10.04 >> Front seats (standard seat), removing and installing >> Seat belt anchor, removing and installing

Seat belt anchor, removing and installing

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Seat Belt Anchor Remove/Install Components
GW00020745Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Seat belt anchor

NOTE:
  • On height-adjustable seat: Move seat up.
  • Removal:

Installation is reverse of removal.

2 - Assembly cover

scientia non olet · About LEMON Manuals