Backrest cover, removing and installing
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
- Attach backrest panel all around trim - 1 - using adhesive tape - 2 -.
- Using pry lever 80-200, pry off upper backrest cover at inner side, starting from backrest panel.
- Disengage clip at front corner of backrest panel extremely carefully.