Power Convertible Top Valve 1, 2, And 3 -N272- / -N341- / -N342-, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specification. Refer to OVERVIEW - HYDRAULIC SYSTEM .

Install in reverse order of removal. Note the following:

-- Make sure the hole for the valve is clean.

-- Install the replacement valve into the hole and tighten the screws to the tightening specification.

-- Install the hydraulic pump. Refer to HYDRAULIC UNIT (HYDRAULIC PUMP), REMOVING AND INSTALLING .

-- Check the fluid level and fill with fluid if necessary. Refer to HYDRAULIC SYSTEM, FILLING AND BLEEDING .