Convertible Top Lock, Removing And Installing: Removing
-- Remove the front trim panel. Refer to FRONT TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the bolts -1- from the retaining strip -2- for the convertible top cover/convertible top headliner -arrows-.
-- Remove the retaining strip -1- to the side -arrow- from the convertible top cover/convertible top headliner.
-- Mark the installed position of the convertible top lock -2- with a felt-tip pen for the reinstallation of the front rail -1- -arrows-.
-- Lift the securing tabs to remove the bracket -2- for the Convertible Top Left Lock Switch -F169- / Convertible Top Latch -Open- Switch -F294- -1- from the convertible top lock -3-.
-- Release the locking spring -1- and remove the lock rod -2- from the ball pin on the convertible top lock -3-.
-- Remove the bolts -2- while, at the same time, counterholding the nut -4- by hand between the front rail and the convertible top cover.
If the nut is not counterheld, it will fall out of the mount.
-- Remove the convertible top lock -1- from the front rail -3-.