Convertible Top Latch Motor, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specification. Refer to OVERVIEW - CONVERTIBLE TOP LATCH .

Install in reverse order of removal. Note the following:

-- Open and close the convertible top lock one time to center the drive using a 6 mm SW hex socket wrench.

-- Install the convertible top headliner. Refer to CONVERTIBLE TOP HEADLINER, REMOVING AND INSTALLING .

-- Install the front trim. Refer to FRONT TRIM PANEL, REMOVING AND INSTALLING .