Trailer Hitch Socket, Removing And Installing - Version 3: Removing
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Fold out the trailer hitch. Refer to the vehicle Owner's Manual.
-- Switch off the ignition and remove the ignition key.
-- Remove the bolts -arrows-.
-- Remove the socket from the retaining plate.
-- Remove the rubber cover from the socket.
-- Release the retaining clips in direction of -arrows- and press multiple connector -1- out of socket -2-.
-- Release the retaining clips in direction of -arrows- and remove retainer -2- from multiple connector -3-.
NOTE:
Carefully remove the retainer so that contacts -2- of the multiple connector are not disconnected from the wiring harness.