LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1376 (Maintenance, Diagnosis (Maintenance Procedures) (Cabriolet)) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Spark Plugs, Replacing >> 8-Cylinder 4.2 FSI Gasoline Engine >> Removing Cylinder Bank 1 (Right)

Removing Cylinder Bank 1 (Right)

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING .

-- Remove the affected air filter housing. Refer to the appropriate Service Information .

-- Remove the nuts -arrows- and then remove the air filter housing bracket -1-.

Fig 1: Identifying Air Filter Housing Bracket Components
GWWA24-10946Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -1- and -2- from the connector strip.

Fig 2: Identifying Bolts & Ignition Coils Electrical Harness Connectors
GWWA15-10235Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the connector toward the ignition coil, open the lock by hand and connect the connector to the ignition coils.

-- Move the wiring harness slightly down.