LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1376 (Maintenance, Diagnosis (Maintenance Procedures) (Cabriolet)) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Spark Plugs, Replacing >> 4-Cylinder 2.0L TFSI Gasoline Engines >> Version 2 Installing

Version 2 Installing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Use the Spark Plug Removal Tool:VAS 3122B  to screw in the new spark plugs and to tighten to specification.

-- Lubricate the ignition coils. Refer to IGNITION COIL, LUBRICATING .

-- Align all the ignition coils one after the other and insert them loosely into the spark plug shaft.

-- Press the ignition coils evenly onto the spark plugs by hand. Do not hit them.

-- Tighten the ignition coil bolts to specification.

-- Connect the connector at the same time.

-- Install the engine cover. Refer to ENGINE COVER, REMOVING .

Tightening specification Nm
Spark plugs in cylinder head 30
Ignition coil bolt 10
scientia non olet · About LEMON Manuals