LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1376 (Maintenance, Diagnosis (Maintenance Procedures) (Cabriolet)) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Reducing Agent ADBLUE® Tank, Filling >> General Information

General Information

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • The reducing agent can irritate your skin, eyes and lungs.
  • If there is contact with the fluid, flush immediately with plenty of water.
  • Seek medical attention.
CAUTION:

Do not allow reducing agent to come into contact with clothing or the vehicle.

Rinse with clear water and dry with a lint-free cotton cloth.

If the reducing agent has already formed crystals, use warm water and a sponge.

If the reducing agent has crystallized and remains on a vehicle body part for a while, it will damage the surface.

Dispose of any remaining reducing agent. Do not reuse it.

Follow all disposal regulations.

NOTE:

The following applies to diesel vehicles with Selective Catalytic Reduction (SCR).

The reducing agent is not a diesel additive and must not be poured in the fuel tank.

Reducing agent is used to reduce the nitric oxide in the exhaust from diesel vehicles.

The use of this reducing agent is legally required in vehicles with SCR.

Do not mix any additives with the reducing agent and do not dilute it with water.

Do not use any already used fluid.

Only use reducing agent which is still in its original container. Check the expiration date on the container.

Follow the manufacturer instructions for use and storage.

AdBlue® is a registered trademark of the Automobile Manufacturers Association (VDA).