LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1373 (Interior Lights, Switches (Cabriolet)) >> 96 Interior Lights, Switches >> Lamps >> Central Locking -Safe- Indicator Lamp -K133-, Removing And Installing >> Installing

Central Locking -Safe- Indicator Lamp -K133-, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal. Note The Following: 

NOTE:

The new Central Locking -SAFE- Indicator Lamp -K133- must be connected with the door trim wiring harness.

-- Disconnect the wire and connect it with the new wire for the Central Locking -SAFE- Indicator Lamp -K133-. Refer to E-BOX RELAY AND FUSE PANELS, REMOVING AND INSTALLING .

-- Slide the central locking LED in until it engages audibly.

-- Install the door trim panel. Refer to FRONT DOOR TRIM PANELS .

scientia non olet · About LEMON Manuals