Garage Door Opener Control Head -E284-, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Interior/Reading Lamp, Removal

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the front interior lamp/reading lamp. Refer to FRONT INTERIOR LAMP/READING LAMP, REMOVING AND INSTALLING .

-- Carefully pry the diffusion lens -1- out of the socket -2- -arrow- using the Trim Removal Wedge:3409 .

-- Release the retaining clips -3- with a small screwdriver -arrow- and tilt the Garage Door Opener Control Head -E284- -1- out of the interior lamp/reading lamp -2-.

Fig 2: Identifying Garage Door Opener Control Head, Removal

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.