LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1373 (Interior Lights, Switches (Cabriolet)) >> 96 Interior Lights, Switches >> Anti-Theft Alarm System >> Anti-Theft Alarm System Sensor -G578-, Removing And Installing >> Removing

Anti-Theft Alarm System Sensor -G578-, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Interior Sensor Trim
GWWA70-11007Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unclip the trim -2- on the lower roof frame trim -3- -arrow-.

-- Turn the interior monitoring individual sensor -1- counter-clockwise and remove the trim.

-- Remove the front interior/reading lamp. Refer to FRONT INTERIOR LAMP/READING LAMP, REMOVING AND INSTALLING .

Fig 2: Identifying Anti-Theft Alarm System Sensor, Removal
GWWA96-10298Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release retaining clips -arrow A- and tip Anti-Theft Alarm System Sensor -G578- -3- out of interior light/reading light -arrow B-.

-- Using a small screwdriver -1-, carefully unclip individual interior monitoring sensors -2- from interior light/reading light.