Cell Phone Preparation Connector Assignment, Can
TELEPHONE TRANSCEIVER -R36-
A - Bluetooth Antenna -R152- Connection
B - Multi-pin connector, 54-pin
Unlisted connector terminals are not assigned.
B - Multi-pin connector, 54-pin
1 - Terminal 30
2 - Terminal 31
3 - Switch-on signal for the Cellular Telephone Amplifier -R86-
8 - LF (+) to Radio -R-
9 - LF (-) to Radio -R-
10 - Terminal 31 (screening ground) (not used)
11 - Microphone IN (+) for the Microphone Unit in Front Roof Module -R164- (Left Front Microphone -R140-)
12 - Microphone IN (-) for the Microphone Unit in Front Roof Module -R164- (Left Front Microphone -R140-)
16 - NF mute, not used
17 - CAN bus high (Infotainment)
18 - CAN bus low (Infotainment)
37 - Chamber 30 to Telephone Baseplate -R126-
39 - Chamber 31 to Telephone Baseplate -R126-
41 - Chamber 30 to Telephone Baseplate -R126-
42 - Microphone output (+) to Telephone Baseplate -R126-
43 - Microphone output (-) to Telephone Baseplate -R126-
44 - Terminal 31 (ground shielding)
45 - LF (+) from Telephone Baseplate -R126-
46 - LF (-) from Telephone Baseplate -R126-
47 - DIAG signal from Telephone Baseplate -R126-
49 - Ser-Tx (+) to Telephone Baseplate -R126-
50 - Ser-Tx (-) to Telephone Baseplate -R126-
51 - Ser-Rx (+) from Telephone Baseplate -R126-
52 - Ser-Rx (-) from Telephone Baseplate -R126-