3-Spoke Steering Wheel MULTIFUNCTION Buttons, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Trim Removal Wedge :3409
The multifunction buttons -2- are clipped in the trim molding -1-. The trim -1- and the multifunction buttons -2- are attached to the steering wheel. The multifunction buttons -2- have an extra retainer -3-.
While removing, first make sure the trim -1- can be loosened by hand (approximately 5 mm). Then, using the Trim Removal Wedge :3409 , open the retainers -3- on the multifunction buttons -2- and remove the trim -1- together with the multifunction buttons -2-.
Trim retainers
- Trim Molding
Arrows - tabs
Multifunction Button Retainers
- Multi-function button
- Catch
-- Turn off the ignition and all electrical consumers and remove the ignition key.