Lock Cylinder, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Lock Cylinder

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the rear lid trim panel. Refer to LUGGAGE COMPARTMENT TRIM PANELS

-- Remove the screws -1 and 7- and remove the lock cylinder anti-theft protection -2-.

-- Unlock the lever -6- -arrow A- and remove the cable bracket -3- from the mount -arrow B-.

-- Disengage the cable -4- from the actuator lever -5-.

-- Turn the lock cylinder -1- to the right -arrow A- and remove it from the grip piece -2- -arrow B-.

Fig 2: Turning Lock Cylinder -1- To Right -Arrow A- & Remove It From Grip Piece -2- -Arrow B

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.