LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1370 (Hood, Lids (Cabriolet)) >> 55 Hood, Lids >> Rear Lid >> Catch, Removing And Installing >> Removing

Catch, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Adjusting Striker Pin Height
GWWA55-10425Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the rear lid end piece trim panel. Refer to LUGGAGE COMPARTMENT TRIM PANELS .

-- Remove the nuts -1 and 3- and remove the striker pin -2-.