Catch, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specification. Refer to OVERVIEW - LATCH AND GRIP PIECE .

Install in reverse order of removal. Note the following:

-- Insert the catch on the proper side.

The round side -arrow- on the catch faces upward.

-- Adjust the catch. Refer to REAR LID, ADJUSTING .