Headlamp, Removing And Installing, Hid Headlamp: Removing
-- Turn the light switch to position "0".
-- Turn off the ignition and all electrical consumers and remove the ignition key.
-- Do not press the flasher.
-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -4-.
-- Remove the bolts -2- and -5-.
-- Loosen the lower bolt -3- on the headlamp housing using a long wrench.
Disregard items -6 and 7-.
-- Remove headlamp -1- toward the front and out of the body.
-- Turn the light switch to position "0".
-- Turn off the ignition and all electrical consumers and remove the ignition key.
-- Do not press the flasher.
-- Remove The Front Bumper Cover. Refer To FRONT BUMPER COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -2-.
-- Remove the bolts -1 and 4-.
-- Remove the bolt -3- and remove the adjusting mechanism from the headlamp housing.
-- Loosen the screws -arrows- a few turns from the headlamp housing.
-- Remove the headlamp -5- toward the front from the body.
- The ventilation hose may need to be removed from the bracket to do this depending on the date of manufacture.