Headlamp, Removing And Installing, Hid Headlamp: Installing
- Tightening specification. Refer to OVERVIEW - HID HEADLAMP .
Install In Reverse Order Of Removal. Note The Following:
-- When inserting the headlamp -2- into the mount -1-, make sure the guide tracks on the headlamp engage in the guides on the mount -arrows-.
- Headlamp must slide gently into mount and without using force.
-- When sliding the headlamp -4- in, make sure the headlamp ventilation -3- slides evenly into the mount -2- for the ventilation hose -1- -arrow-.
-- Tighten the bolts -2, 3, 5-.
-- Install the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .
- Tightening specification. Refer to OVERVIEW - HID HEADLAMP .
Install In Reverse Order Of Removal. Note The Following:
-- When inserting the headlamp -2- into the mount -1-, make sure the guide tracks on the headlamp engage in the guides on the mount -arrows-.
- Headlamp must slide gently into mount and without using force.
-- When sliding the headlamp -4- in, make sure the headlamp ventilation -3- slides evenly into the mount -2- for the ventilation hose -1- -arrow-.
-- Tighten the bolts -1, 3 and 4- and -arrows-.
-- Install the front bumper cover. Refer to FRONT BUMPER COVER, REMOVING AND INSTALLING .