Headlamp, Changing From RHD To LHD, Halogen Headlamps From My 2012, USA From My 2013: Procedure

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The cover foil has a molding (marking foil), which must be placed along the line around the headlamp lens so that it covers the asymmetrical area of the low beam.

-- Clean the headlamp glasses and dry them.

Headlamp Driver's Side:

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Peel off the protective film from the protective backing.

-- Place the protective backing starting on the corner -4- flush along the line -3- going around the headlamp glass.

-- Affix the cover foil to the headlamp lens as illustrated above.

-- Separate the marking foil -1- from the protective backing -2- at the perforation -arrow- and pull it off the headlamp glass.

Headlamp Passenger's Side:

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Peel off the protective film from the protective backing.

-- Place the protective backing starting on the corner -1- flush along the line -2- going around the headlamp glass.

-- Affix the cover foil to the headlamp lens as illustrated above.

-- Separate the marking foil -4- from the cover foil -3- at the perforation -arrow- and pull it off the headlamp lens.