LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1361 (Passenger Protection, Airbags, Seat Belts (Cabriolet)) >> 69 Passenger Protection, Airbags, Seat Belts >> Thorax Airbags >> Front Thorax Airbag With Igniter, Removing And Installing >> Removing

Front Thorax Airbag With Igniter, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

-- Remove the front seat:

-- Attach the front seat to the Engine/Transmission Holder - Seat Repair Fixture:VAS6136  . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .

-- Remove the backrest cover. Refer to OVERVIEW - BACKREST COVER, TWO-PIECE BACKREST COVER WITH BACKREST FRAME TRIM .

-- Remove the front backrest:

-- Free up the wiring harness -1- from the connector station to the thorax airbag.

Fig 1: Identifying Side Air Bag Components
GWWA69-10451Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the seat cover from the backrest until the thorax airbag screw -6- is accessible. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING, STANDARD/SPORT SEAT .

-- Remove the bolt -6-.

-- Remove the thorax airbag -5- with the hooks -2, 3 and 4- from the backrest frame while guiding the thorax airbag wiring harness.