Rear Three-Point Seat Belt, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- If parts of the seat belt system are removed due to an accident, replace the belt system bolts.

-- Insert the three-point seat belt with the anti-twist mechanism in the mount and tighten the bolt.

Rear Seat Belt Tensioner Igniter:

WARNING:

Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
Before handling pyrotechnic components (for example, connecting a connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.

NOTE:

Make sure the connectors are installed all the way and engage audibly.

Make sure the wires do not get caught.

WARNING:

The ignition must be on when connecting the battery. If pyrotechnic components (for example, airbag, belt tensioner) are not repaired correctly, they may deploy unintentionally after connecting battery. There must not be anyone in the vehicle interior when connecting the battery.

-- Connect the battery ground cable with the ignition switched on. Refer to BATTERY .

Continuation for All Vehicles:

Further installation is the reverse order of removal.