Front Three-Point Seat Belt, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
Before handling pyrotechnic components (for example, connecting a connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.

Install in reverse order of removal and Note The Following:

-- If parts of the seat belt system are removed due to an accident, replace the seat belt system bolts.

NOTE:

Make sure the connectors are installed all the way and engage audibly.

-- Insert the seat belt tensioner with the anti-twist mechanism -1- in the mount -2- -arrow- and tighten the bolt.

Fig 1: Identifying Anti-Twist Mechanism And Mount

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

WARNING:

The ignition must be on when connecting the battery. If pyrotechnic components (for example, airbag, belt tensioner) are not repaired correctly, they may deploy unintentionally after connecting battery. There must not be anyone in the vehicle interior when connecting the battery.

-- Connect the battery ground cable with the ignition switched on. Refer to BATTERY .

-- After installing the three-point seat belt on the front passenger side, check the child seat anchorage function of the belt. Refer to SEAT BELT FOR CHILD SEAT, CHECKING CHILD SEAT RESTRAINT FUNCTION, MARKET-SPECIFIC, NOT FOR DRIVER SEAT BELT .