LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1361 (Passenger Protection, Airbags, Seat Belts (Cabriolet)) >> 69 Passenger Protection, Airbags, Seat Belts >> Seat Belts >> Front Belt End Fitting, Removing And Installing >> Installing

Front Belt End Fitting, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and Note The Following: 

-- If parts of the seat belt system are removed due to an accident, replace the seat belt system bolts.

-- Attach and tighten the front belt end fitting -4- together with the bushing -3- onto the bolt -2-.

scientia non olet · About LEMON Manuals