Overview - Driver Side Airbag, Bolted Airbag Version
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Steering Column Electronics Control Module -J527-
- With Airbag Spiral Spring/Return Spring with Slip Ring -F138- and Steering Angle Sensor -G85-
- Removing and installing the steering wheel. Refer to STEERING WHEEL .
- Steering Wheel
- There are different versions. Refer to the Parts Information for the allocation.
- Removing and installing the steering wheel. Refer to STEERING WHEEL .
- Bolt
- Tightening specification. Refer to STEERING WHEEL .
- Connector
- For the Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-
- Replacing. Refer to AIRBAG CONNECTOR, REPLACING .
- Connector
- For vehicles equipped with a multifunction steering wheel
- Replacing. Refer to AIRBAG CONNECTOR, REPLACING .
- Driver Side Airbag
- With Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-WARNING:
Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Removing and Installing. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .
- With Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-
- Bolt
- 7 Nm
- Quantity: 2
- Closure Cap
- Quantity: 2
- For driver side airbag bolt
- Locking Bracket
- Use a T25 TORX screwdriver, approximately 100 mm long
- Steering Column Electronics Control Module -J527-
- With Airbag Spiral Spring/Return Spring with Slip Ring -F138- and Steering Angle Sensor -G85-
- Removing and Installing. Refer to SENSORS
- 4-Spoke Steering Wheel
- Equipped on some models
- Removing and installing the steering wheel. Refer to STEERING WHEEL .
- Wiring Harness
- For the Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-
- Replacing. Refer to AIRBAG CONNECTOR, REPLACING .
- Press in to secure in the pockets on the steering wheel.
- Driver Side Airbag
- With Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-WARNING:
Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Removing and Installing. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .
- With Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-
- Bolt
- Tightening specification. Refer to STEERING WHEEL .
- 3-Spoke Steering Wheel
- Equipped on some models
- Removing and installing the steering wheel. Refer to STEERING WHEEL .
- Wiring Harness
- For the Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-
- Replacing. Refer to AIRBAG CONNECTOR, REPLACING .
- Press in to secure in the pockets on the steering wheel.
- Driver Side Airbag
- With Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-WARNING:
Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Removing and Installing. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .
- With Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-
- Bolt
- Tightening specification. Refer to STEERING WHEEL .