Airbag Connector, Replacing, Inserted Airbag Version: Installing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Release Connector Lock Using A Small Screwdriver And Disconnect Harness Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

WARNING:

Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
Before handling pyrotechnic components (for example, connecting a connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.

-- Connect the connector -1- to the airbag igniter -arrow A-.

-- Press in the connector lock -2- -arrow B-. While doing this, the connector is pushed into the airbag igniter and locks into place.

Further installation is performed in reverse order of removal, while noting the following:

NOTE:

Make sure the connectors are installed all the way and engage audibly.