Airbag Connector, Replacing, Bolted Airbag Version: Removing
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
-- Remove the driver side airbag. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .
WARNING:
Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
-- Disconnect the connectors -4, 6 and 7-.
-- Unlock the connector locks -8- using a small screwdriver and then disconnect the connectors -1 and 2- for Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-.
-- Disengage and remove the wire -3- on the bracket -5-.