LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1360 (Seat Frames (Cabriolet)) >> 72 Seat Frames >> Rear Seats >> Rear Seat Backrest, Removing And Installing >> Installing

Rear Seat Backrest, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Do Not Load The Rear Seat Backrest When It Is Folded Down.

-- Mount the backrest frame on the threaded pin and tighten the screws hand-tight.

-- Fold the left and right rear seat backrests back up and lock them.

-- Tighten the bolts -1-.

-- Unlock the left and right rear seat backrest and fold them forward.

-- Tighten the bolt -2-.

Further installation is the reverse order of removal.

scientia non olet · About LEMON Manuals