Rear Headrest Pop Rivet Nut, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Follow the safety precautions for the rollover protection. Refer to ROLLOVER PROTECTION .
-- Open the convertible top until the displayed position of the top and the convertible top compartment cover is reached.
-- Support the convertible top with a suitable wood rod.
-- Remove the rear headrest. Refer to HEADREST, REMOVING AND INSTALLING .
-- Coat the 6.5 mm drill bit with grease so that the drill shavings will stick to it.
WARNING:
Risk Of Eye Injury.
- Wear Protective Eyewear!
-- Remove The Old Pop Rivet Nuts.
-- Clean up any drill shavings with a vacuum cleaner.