Tunnel-Side Trim, Removing And Installing, Standard Seat, Sport Seat, Super Sport Seat: Removing
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
-- Remove The Front Seat:
- Standard seat and sport seat (manual). Refer to FRONT SEAT, REMOVING AND INSTALLING, MANUAL .
- Standard and Power Sport Seat, Comfort Seat and Super Sport Seat. Refer to POWER FRONT SEAT, REMOVING AND INSTALLING .
-- Attach the front seat to the :VAS6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Remove the expanding rivets -3 and 4-.
-- Remove the tunnel-side trim -2- upward.
NOTE:
Make sure the tab -1- is not damaged when removing the trim.