Tunnel-Side Trim, Removing And Installing, Bucket Seat: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Trim, Tunnel Side

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bucket seat. Refer to FRONT SEAT, REMOVING AND INSTALLING, BUCKET SEAT .

-- Secure the front bucket seat to the :VAS6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .

-- Remove the right backrest cover. Refer to BACKREST COVER, REMOVING AND INSTALLING, BUCKET SEAT .

-- Remove the seat belt latch. Refer to FRONT SEAT BELT LATCH, REMOVING AND INSTALLING .

NOTE:

Do Not Disconnect The Connector.

-- Press the locking pin inward and remove the expanding clip -1-.

-- Release the clip -3- -arrow A- and remove the tunnel-side trim -2- upward and toward the front -arrow B-.